• Next working day delivery on orders placed before 2pm
  • FREE Next day delivery on orders over £250*
  • Call us on 01455 234 400 Mon-Fri 8:30-5:30

TRADE FLOORING PROFESSIONALS - Check out our Whiteriver Flooring Catalogue

Lecol 5500 Alcohol Based Wood Flooring Adhesive 25kg

In stock
Product Code:

Lecol 5500 Alcohol Based Wood Flooring Adhesive 25kg


Lecol 5500 Alcohol Based Wood Flooring Adhesive 25kg

Lecol 5500 adhesive is suitable for all types of wood flooring and can be universally applied. Can be used to glue mosaics, raw and engineered wood, and new and replacement parquet flooring.


Lecol 5500 is an alcohol based adhesive for use with all types of wood flooring on absorbent and non-absorbent sub-floors. With Lecol 5500 the high initial grab is unrivalled and together with it's very good filling properties make Lecol 5500 the ideal adhesive for installing large floor elements. Lecol 5500 can also be used to install pre-finished wood flooring.

Underfloor heating:

The heating should be in use at least 10 days prior to laying. Switch off 2 days prior to laying or reduce to a lower temperature in winter. Reheating can be effected slowly 3 days after laying.

Lecol 5500 is a solid adhesive limiting the movement of the wood due to expansion and contraction as the room climate conditions change. The use of a solid adhesive is essential when finishing the floor with a waterborne lacquer. This contributes to the long life span of the floor and limits the hollow sound of footsteps.

The correct preparation of the subfloor is very important when choosing an adhesive for wood flooring. Floors must be sound, clean and dust free. Levelling compounds must be used where necessary and the floors correctly primed to ensure a better bond between the adhesive and the sub-floor. Some primers can be used as a Damp Proof Membrane.

Lecol K495 can be used to prime the subfloor prior to the application of Lecol 5500 to increase the structural strength of the subfloor and provide a better bond to the adhesive.

Lecol PU235 can be used to prime the subfloor and create a Damp Proof Membrane prior to application of Lecol 5500. Sharp-grit S28 must be scattered on the final coat of Lecol PU 235 to ensure adhesion with Lecol 5500.  Use Lecol 7500 Filler to fill gaps and damaged spots.

Product Information:

Consumption: 700-900 g/m2

Write Your Own Review
You're reviewing:Lecol 5500 Alcohol Based Wood Flooring Adhesive 25kg
Your Rating

Great Service

We know our trade inside out and we love to give you advice

Next Day Delivery*

it’s even FREE when your order is over £250

Trade Friendly

Open a trade account today and reap the rewards!