Bona Mega Natural - 5 Ltr

Bona Mega Natural 5ltr

If you prefer the look and feel of pure, finely sanded wood, Bona MegaNatural is a great choice. It seals and protects wooden floors yet preserves the look and feel of pure wood.

Preparation

Pre treat the surface with Bona primer. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination.

Application

Apply Bona Mega Natural using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. Allow to dry.

Apply a second layer of Bona Mega Natural.If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying a final layer of varnish.
Note: If the previous layer of varnish has been allowed more than 24 hours drying time then an intermediate sanding is always required.

Light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time.

Maintenance

Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad. Worn surfaces can be renewed by applying an additional layer of Bona Mega Natural after first properly cleaning and preparing the surface.

Documents

• Technical Data Sheet
• MSDS