Bona Sportive Primer 10ltr

Bona Sportive Primer 10ltr

Bona Sportive Primer is a one-component waterborne primer for use on wooden floors used as sports floors prior to overcoating with Bona Sportive Finish. It gives the surface a well-bodied look and enhances the natural colour of the wood.

Benefits

• Designed specifically for use with Bona Sportive Finish.
• High solids content.
• Well-bodied surface.
• Enhanced natural wood colour.
• NMP and NEP free
• Low VOC

Preparation

Ensure floor is acclimatised to its end-use environment. Surface to be coated must be sanded back to bare wood, dry and free from sanding dust, oil, wax and other contamination. A Bona Sanding Disc or Screen grit 120 should be used for the final sanding of the wood. Allow varnish to reach room temperature, insert filter and shake the container thoroughly before use. Optimal application conditions are between 18-25⁰C and 40-60% relative air humidity. High temperatures and low humidity shorten drying time, low temperatures and high humidity lengthen the drying time. Ensure good ventilation during application and drying. Minimum temperature for use is 13⁰C.

Application

Apply an even coat of Bona Sportive Primer using a Bona Applicator Bar or a Bona Roller. Care should be taken to achieve a uniform level of timber saturation to avoid timber colour variation. Always maintain a ‘wet edge’ to avoid overlaps.

Allow to dry and apply a layer of Bona Sportive Finish.

Note: If Bona Sportive Primer has been allowed more than 24 hours drying time then an intermediate sanding is always required before applying further coats of varnish.

Documents

• Technical Data Sheet
• MSDS