• Next working day delivery on orders placed before 2pmNext working day delivery on orders placed before 2pm
  • FREE Next day delivery on orders over £250*FREE Next day delivery on orders over £250*
  • Call us on 01455 234 400 Mon-Fri 8:30-5:30Call us on 01455 234 400 Mon-Fri 8:30-5:30

TRADE FLOORING PROFESSIONALS - Check out our Whiteriver Flooring Catalogue

Bona R850 15kg - Silane Based Flooring Adhesive

Out of stock
Product Code:
BONA-R850-15
Bona R850 15kg - Silane Based Flooring Adhesive
£91.92

Bona R850 Flooring Adhesive

Bona R580 is an elastic one-component silane-based adhesive for parquet floors. It is water and solvent-free and causes practically no swelling of the wood. Firm texture – it retains the trowel pattern. Available in a 600ml ‘sausage’ pack, Bona R850T is a high viscosity adhesive made for gun application. Rapid setting, the hardened adhesive has a firm texture and can be used on nearly all sub floors. Suitable for underfloor heating.

Coverage:Usage approximately 850 g/m2. Mosaic parquet and similar 1 layered prefinished parquet.

Benefits

  • 1-component, easy to handle
  • soft elastic
  • water and solvent free, nearly no swelling of the wood
  • wood adhesion to almost all substrates and timber materials, splashed material can be easy removed
  • firm texture – retains trowel pattern.

Application

The adhesive should be applied evenly using a notched trowel appropriate to the flooring being laid (see below). The parquet should be laid on the adhesive and pressed down firmly during the open time, approx. 40 minutes. If on the sub floor applied adhesive has a skin, remove adhesive and apply new. If some adhesive is pressed up in joints (so that it might come into direct contact with the finish) it must be carefully removed. Depending on the expected average conditions the parquet needs, for the best adhesion, the correct moisture content of the wood to be selected. Solid wood parquet should be slightly more humid whilst multi-layered or pre-finished parquet should be slightly drier.

Drying Time

Sanding and the application of a surface coating may normally be carried out after after 12-24 hours. After 24-48 hours it is usually possible to apply load or stress to the floor.

The drying time depends on the type of parquet, the absorbency of the substrate and the climate conditions.

Write Your Own Review
You're reviewing:Bona R850 15kg - Silane Based Flooring Adhesive
Your Rating

Great Service

We know our trade inside out and we love to give you advice

leading floor brands authorised distributor

Next Day Delivery*

it’s even FREE when your order is over £250

FREE Next day delivery on orders over £250*

Trade Friendly

Open a trade account today and reap the rewards!

trade accounts welcome