Bona Mix & Fill plus - 5 Ltr

Bona Mix & Fill plus - 5 Ltr Waterborne

Bona Mix&Fill allows the specification of a completely waterborne installation. This joint filler is designed to be mixed to a suitable consistency with fine sanding dust from the floor being treated. Bona Mix and Fill is used to fill joints up to 2mm in width and other minor defects in wooden floors.

• Works with all Bona finishing and oil systems 
• Free of solvents
• No unpleasant smell
• Fills the joints, but doesn’t slump
• Waterborne, but anti-corrosive
• Dries quickly
• Easy to sand
• Always the right colour of the joint

Preparation

Ensure floor is acclimatized to its end-use environment, dry and free from wax, dirt and other contamination. Sand the floor to bare wood and to grit 60-80 (before making the final cut). Temperature of the room and the product must not fall below +13^oC during application and drying.

Application

1. Shake can thoroughly before use.
2. Mix the product in a container with fine and clean wood dust to a smooth consistency.
3. Apply the mixture across the whole floor using a stainless steel trowel and repeat the procedure if necessary.
   Note: Mix&Fill is not suitable for joints larger than 2 mm. Bona Gapmaster can be used to fill wider gaps.
4. When the surface is dry, sand off all excess Mix&Fill with a belt and edge sander grit 100-120.End with a screen grit 120-150 if required.
5. Treat the floor with any Bona coating system according to respective user instruction.

Documents

• Technical Data Sheet
• MSDS